Owners Manual
Read and understand the manual BEFORE using the unit.
Trained Operators Only
Untrained operators have a higher risk of injury or death. Only allow trained/supervised people to use this machine. When not being used, be sure to disconnect machine to prevent unauthorized use. Make the work area kid-proof!
Unsafe Environment
Do not use machinery in areas that are wet, cluttered or have poor lighting. Don’t use on excessively sloped areas where loads may shift unexpectedly. This is particularly critical if loading an object using a wheeled cart.
Mental Alertness Required
Full mental alertness is required for safe operation of machinery. Never operate under the influence of drugs or alcohol, or when tired or distracted.
Electrical Equipment Injury Risks
The unit operates under heavy load 12-volt power from a vehicle. Treat all connections and wiring the same as you would around the vehicle battery. Poor connections can lead to heavy sparking, shorts, or battery explosions. Always disconnect power before accessing or exposing the electrical components, making adjustments, changing tooling, or servicing the machine.
Eye Protection
Always wear ANSI-approved safety glasses or a face shield when operating the unit to reduce eye injury from flying particles.
Wear Proper Apparel
Do not wear loose clothing apparel or jewellry than can become entangled in moving parts. Always tie back or secure long hair. Wear sturdy, non-slip footwear to avoid slipping.
Remove Adjusting / Maintenance Tools
Tools left on machine can become dangerous projectiles while operating unit, or can cause jamming if caught in moving parts. Always verify removal before starting machine, or transporting.
Intended Usage
Only use your LoadaLog for its intended, stated purpose, and never make any modifications. Modifying or using the machine differently from intended can result in malfunction or mechanical failure that can lead to serious personal injury.
Awkward Operating Positions
Keep proper footing and balance at all times when operating. Avoid awkward hand positions, and always be aware of potential unintentional shifting of the load. In particular, be very aware of the potential danger for “whip-lash” of the winch cable in the event of accidental slippage or breaking while under load.
Children and Bystanders
Keep children and bystanders at a safe distance from the work area. Stop using the machine if they become a distraction.
Overloading Machinery/Winch
The LL1000 is capable of easily loading heavy logs of up to 1,000 pounds (see Section D-3 to calculate approximate weights). But do not force the unit beyond its capacity, or allow it to jam. It will do the job safer and better at its designed rate.
Proper Positioning of Operator
Always be aware of the very heavy loads and strains being placed on the entire unit. The operator should never position themselves under or near any areas that might be encroached upon in the event of slippage or failure. In addition, while the winch cable is under strain, stay out of the “whip-lash” area in case the cable snaps or is released unexpectedly.
Stable Machine
Unexpected movement during operation greatly increases the risk of injury or loss of control. Before starting, verify that the machine is stable and locked in place.
Use Only Recommended Accessories
Consult the manual or the manufacturer for recommended accessories. Using improper accessories can result in injury or machine damage.
Unattended Operation
To reduce the risk of injury, electrically disconnect machine before walking away. Never leave machine running while unattended.
Maintain with Care
Follow all maintenance and lubrication schedules to keep machine in good working order.
Check Damaged Parts
Regularly inspect machine for any condition that may affect safe operation. Immediately repair/replace damaged or mis-adjusted parts before operating the machine. Pay special attention to cable damage.
EXPERIENCING DIFFICULTIES
If at any time you experience difficulties performing the intended operation, stop using the machine.
Section D-3
For safety reasons, and so as to not overload your truck and/or your LoadaLog, it is the operator’s responsibility to have a good working estimate of the weight of the log to be loaded. There are a variety of ways to accomplish this, including going online to www.woodweb.com to use their easy “Log Weight Calculator”. Plug in the species and sizes of the log(s). Be aware that the moisture content can significantly affect the log weight. The calculator assumes a 75% moisture level.